ProSim SA
Immeuble Stratège A
51, rue Ampère
F-31670 Labège
FRANCE

Tel. :+33 (0)5 62 88 24 30
Fax :+33 (0)5 62 88 24 39


ProSim Inc
325 Chestnut Street
Suite 800
Philadelphia, PA 19106
USA

Tel. :+1 215 600 3760
Fax :


  • We make sure to deliver a Premium Support and knowledge for you to realize the full potential and functionalities of your software. Our customers are our Priority!
  Home / ABOUT PROSIM / PROSIM NEWS & EVENTS / PRESS RELEASES

Monsieur Saifuddin Ahmed received the Helmut Knapp poster award during ESAT 2017
22/05/2017

Mr. Saifuddin Ahmed, whose thesis is cofinanced by ProSim and IFPEN, was awarded with the Helmut Knapp poster award.

Modeling of Divided Wall Columns (DWC) in ProSimPlus
15/12/2016

A new dimensioning method for divided wall columns has been implemented in ProSimPlus.

Nitric Acid Industry: Collaboration in Process Simulation between ProSim and Johnson Matthey Plc
01/12/2016

ProSim collaborates with Johnson Matthey Plc to allow nitric acid manufacturers to further enhance the performance of their plants.

Ariane and CBE, utilities management software, now handled by Proesis
18/11/2016

To better meet customer demand and further develop this "utilities" activity, ProSim has decided to put this business into a new company: Proesis

ProSim announces the release of its new software dedicated to improving the energy efficiency of processes: ProSimPlus Energy
25/11/2015

ProSim announces the release of a must-have software to improve process energy efficiency. ProSimPlus Energy is a steady-state simulation software that provides all the tools to optimize the energy consumption of continuous industrial processes.

ProSim (France) and ZEAN Process Engineering (Spain) entered into a formal reseller agreement
11/02/2015

ProSim, leading European process simulation software company, develops its presence in Spain and Portugal through a commercial representation partnership with Zean, the engineering company specialized in thermal separation processes. The agreement will strengthen ProSim's regional presence in Spain and Portugal and will enhance Zean Process Engineering Offering.

European Simulation Experts Join Forces
29/01/2015

ProSim SA and INOSIM GmbH are pleased to announce they signed a cooperation agreement.

ProSim announces the launch of Simulis Pinch, a unique tool to improve the energy efficiency of processes through better energy integration
22/09/2014

For the majority of industrial sites, energy is the major cost of operations after the raw materials, so improving the energy efficiency of processes represents a major objective. In this context, ProSim, a leading European process simulation and optimization software provider, announces the launch of a new tool dedicated to improving energy efficiency: Simulis Pinch. This software can generate significant gains with a very short return on investment (at most a few months).

ProSim announces the release of the 2.0 version of Simulis Thermodynamics, its calculation server for thermophysical properties and phase equilibria calculations
18/02/2014

Toulouse, France – February 18th, 2014. ProSim, leading European process simulation and optimization software provider, announces the release of a major new version of its best-seller, Simulis Thermodynamics. This new version offers new functionalities confirming that Simulis Thermodynamics is more than ever the best tool to perform mixture properties and fluid phase equilibria calculations.

ProSim supports a team of future engineers at the 17th edition of the 4L Trophy
13/02/2014

ProSim, leading European process simulation and optimization software provider, is pleased to sponsor a team of future women engineers for the 17th edition of the 4L Trophy. The team of Clara Vrousos and Juliette François, two engineering students in their second year at the ENSIACET, will race for 10 days from February 13th to February 23rd, 2014, among over 1400 teams, traveling 6000 km for the 17th edition of the 4L Trophy.

ProSim and NTP Truboprovod announce the availability of Simulis Thermodynamics software in Russian and the future steps for its customization for Russian users.
14/02/2013

ProSim released the new version of Simulis Thermodynamics, which is now available in 3 languages: English, French and Russian.

Bernard Koehret, founder of ProSim, receives France's highest award, the Legion of Honor
23/01/2013

Toulouse, France – January 23rd, 2013. Following the decree of the President of the Republic dated April 6th 2012, Bernard Koehret, Professor Emeritus of the INP Toulouse, was awarded the Chevalier of the National Order of the Legion of Honor during a ceremony held on January 15th, 2013. Created by Napoléon Bonaparte in 1802, the Legion of Honor is awarded by French government to outstanding individuals.

ProSim receives the CAPE OPEN Award
14/12/2012

During the CAPE-OPEN 2012 Annual Meeting, held in Lyon, on 19-20 September 2012, the CO-LaN (CAPE-OPEN Laboratories Network) Board of Directors awarded to ProSim the "CAPE-OPEN Award" 2011 for its active use of standards and its ongoing support to the CO-LaN projects (www.colan.org).

ProSim releases a major enhancement of BatchReactor, its software for simulation of batch chemical reactors.
10/01/2012

Toulouse, France - January 10th, 2012. ProSim, which provides process simulation and optimization software to the process industries, announces the release of a completely new version of BatchReactor, its software for batch chemical reactors simulation. The new software combines detailed equipment modeling, reaction engineering, and advanced numerical methods to create a state-of-the art simulation environment for chemists and chemical engineers.

ProSim opens a subsidiary in United-States
25/05/2011

ProSim’s continued success as a leading European provider of simulation software and services to the process industries has led to the opening of a strategic office in Philadelphia, Pennsylvania, USA. "It is a natural step in the expansion of ProSim" explains Stéphane Déchelotte, CEO of ProSim. "Our solutions are widely accepted around the world, and particularly in United-States".

The NRTL-PR thermodynamic model
01/12/2010

The NRTL-PR model is available in ProSim thermodynamic library, therefore in most ProSim software.

Xavier Joulia elected Co-Director of LGC
20/09/2010

Technical focus: Gas Engine
06/09/2010

Among the unit operations available in ProSimPlus (steady state process simulation software), the Gas Engine module can represent a internal combustion engine running with fuel gas (natural gas, biogas…). This type of engine produces electricity and thermal energy recovered in heat exchangers.

Technical focus: MHX Exchanger
06/09/2010

Among the unit operations available in ProSimPlus (steady state process simulation and optimization software), the MHX Exchanger enables to calculate the heat exchange between several cold and warm fluids with a given pinch temperature, when looking for a low pinch temperature (of a few degrees) for example.

ProSim signs a distribution agreement with NTP Truboprovod for the Russian market
30/08/2010

ProSim, the leading European process simulation software house, develops its presence in Russia through a commercial representation partnership with NTP Truboprovod, the Russian developer of CAE software for piping and equipment in refining, petrochemical, and energy industries.

New licensing system for ProSim Software
03/07/2010

ProSim undertook a complete renewal of its licensing system to provide customers with additional transparency and flexibility in the management and day to day utilization of their software licenses. This new system, called "ProSim License Manager", is now integrated in most ProSim software.

Technical focus: "double-pipe" heat exchanger
08/06/2010

Among the unit operations available in ProSimPlus (general steady state process simulation), the double-pipe heat exchanger module allows the user to determine the heat exchange and the pressure drop in the tube and in the annular space of a "double-pipe" heat exchanger. The calculation is made from its geometry and the characteristics of its input flows.

New model in ProSimPlus: Solid Oxide Fuel Cell (SOFC)
20/02/2010

ProSim recently integrated in its steady state process simulator ProSimPlus a module to represent the operations of a solid oxide fuel cell (SOFC).

ProSim invests in modeling to serve green chemistry (MEMOBIOL project)
09/02/2010

The MEMOBIOL (Modélisation à l'Echelle MOléculaire pour les BIOraffineries Lignocellulosiques – Molecular Scale Modeling for Lignocellulosic Biorefineries) project, led by IFP (Institut Français du Pétrole), focusing on molecular modeling applied to lignocellulosic biomass (wood residues, cereal straw, forestry waste) has been selected by the ANR (French National Research Agency) as part of its 2009 "Chemistry and Processes for Sustainable Development" call for projects.

Stéphane Déchelotte, CEO of ProSim, elected Vice president of SFGP’s IEP Group
03/02/2010

Stéphane Déchelotte was elected Vice President of the IEP (IT and Process) group of SFGP (French Process Engineering Society) during the group members meeting that took place on January 12, 2010, at Nancy’s ENSIC University.

ProSim and IFP sign an agreement for the valorization of the PC-SAFT thermodynamic model
15/06/2009

ProSim, the European leading provider of simulation software for the process industries (chemical, oil and gas, pharmaceutical, energy…) and IFP (Institut Français du Pétrole / French Petroleum Institute) announce the signature of a partnership agreement aimed at integrating the PC-SAFT thermodynamic model in ProSim software thermodynamic component.

ProSim announces turnover growth of more than 30% in 2008
12/06/2009

ProSim, leading European process simulation software provider announces an increase in sales revenues of 30,7% in 2008, compared to the previous year.

New release of steady state simulation software ProSimPlus available
20/03/2009

ProSim, leading European process simulation software house, announces that a new release of its steady state simulation software, ProSimPlus, is now available.

ProSim announces the release of DIPPR L08+
05/02/2009

ProSim announces the release of DIPPR L08+, an extended database providing thermodynamic and physical properties of a large number of chemical components.

New release of ProSimPlus HNO3, the reference in simulation of nitric acid production units
18/12/2008

ProSim, the leading European process simulation software house, announces the launch of a new release of ProSimPlus HNO3, the software dedicated to the simulation of nitric acid production units and nitrous vapor absorption.

ProSim’s training courses become part of maintenance agreement free of charge
29/10/2008

The scheduled training sessions proposed by ProSim, the process simulation software house, are now included in new maintenance agreements without any additional charge.

ProPhyPlus 2 for calculation of physical properties of fluids and their mixtures released
30/07/2008

ProSim, the French software house, announces the release of ProPhyPlus 2, an advanced software for the calculation of physical properties of pure components and their mixtures over a wide range of temperatures and pressures

Solutia Inc. selects ProSimPlus HNO3 for the optimization of its Pensacola Plant.
28/06/2008

Solutia Inc., one of the world's few fully-integrated producers of nylon 6,6 from intermediates to polymers, plastics and fibers has selected the ProSimPlus HNO3 software to enhance the nitric acid production process in its Pensacola plant (Florida / USA).

PPR78: New predictive equation of state for saturated hydrocarbons, aromatics and naphtenes
25/06/2007

ProSim, the French process simulation software house, announces the integration of PPR78, a new predictive equation of state, in ProSimPlus (software for steady state simulation of industrial processes) and in Simulis Thermodynamics (software component for thermodynamic properties calculation).

ProSim enters a partnership with DECHEMA to distribute the DETHERM database
22/06/2007

ProSim, the French process simulation software house, enters a partnership with DECHEMA, the German Society for Chemical Engineering and Biotechnology, to distribute the DETHERM database and associated software.

New release of ProSimPlus: a new step in terms of openness and ease of use is taken
02/02/2007

ProSim, the French software house, announces the release of a new version of its steady state process simulator, ProSimPlus. Major developments have been accomplished in the software to increase possible fields of application, convenience of use and exploitation of results.

Uhde chooses ProSimPlus HNO3 for the optimization of their plants
30/03/2006

Uhde GmbH, a leading plant engineering and construction company, has chosen the ProSimPlus HNO3 software to enhance the process of the nitric acid production plants they design.