Initiation à l’utilisation de Simulis Pinch Energy et à la méthode de pincement thermique

From 14 February 2022 to 15 February 2022

Summary

Software:

Level

Level 1

Where?

Web - Online
Map

When?

From 14 Feb. 2022
to 15 Feb. 2022

Language

French

Cost

590 € HT

If included in MUTS contract - free

Next dates

Scheduled training sessions

Objectives

This level 1 training course will enable participants to master the fundamental principles of the pinch method and its practice through Simulis Pinch Energy for the synthesis of heat exchangers networks.

At the end of the training session, participants will have the required elements to:
• Quantify the energy performance of a process and optimize it.
• Easily perform thermal pinch method (« pinch technology ») in order to compare actual heating and cooling utilities against targets to eliminate unnecessary energy use (achieve an energy audit).
• Conceive optimal heat exchangers networks to improve energy recovery and global energy efficiency of processes.

Ultimately they will have a practical experience of the Energy module of Simulis Pinch software allowing them to effectively practice the knowledge acquired during the training.

These objectives are evaluated at the end of the training.

Who should attend?

This training session is designed for engineers involved in conception, optimization and analysis of processes and for those in charge of the efficiency of a process. This session is very relevant for engineers facing the energy challenges: energy managers, energy auditors, eco-efficient facilities designers.

Agenda

The training takes place over 2 half-days:

- Monday 14 February: 2:00 pm to 5:30 pm CET (Paris Time) or 8:00 am to 11:30 am EST (New York Time)

- Tuesday 15 February: 2:00 pm to 5:30 pm CET (Paris Time) or 8:00 am to 11:30 am EST (New York Time) 

  1. Introduction:
    1. Context
    2. Energy integration of processes
  2. Pinch method:
    1. Theory of the energy pinch method
    2. Energy diagnostic of processes
  3. Simulis Pinch:
    1. Software overview
    2. Synthesis of heat exchangers network (theory and practice)

You want to learn more about our training courses

Preregister Contact us All training sessions

Cost and Conditions

  • The companies under MUTS Services (Maintenance, Update, Training and Support) contract can register for free (subject to availability) for level 1 training sessions that are related to software covered by their contract. The same applies to universities and public research centers as part of their contract for the use of ProSim software for teaching and / or research purposes.
  • If this training is not part of a MUTS Services contract, the cost is 590 € (before tax) per person. This price includes participation in training sessions and the training manual in electronic format.
  • In order to guarantee the quality of the course and ensure good pedagogical follow-up during the course, the number of available places is limited.
  • We thank you for sending us your pre-registration at least 8 days before the start date of this session. We will then confirm your final registration no later than 5 days before the start of the session.
  • If the number of pre-registered exceeds the number of places available, not all requests can be satisfied, especially if they come from the same company.
  • In order not to deprive other users of the opportunity to follow this training, once we have confirmed your final registration, if you do not attend to the training, an administrative fee of 290 Euros will automatically be invoiced to you.
  • ProSim reserves the right to cancel or not to open this training session if the minimum number of participants is not reached.

Training organization

  • Before the date of the training coursea 30-minute test session will be organized to validate that our online training environment is working properly with your material.
  • Duration: 2 sessions of 3h30 spread over 2 days
  • Location: online training. Login information will be sent to you prior to the training session.
  • Accessibilitycontact us if you have a disability.
  • Equipment: we have a virtual training room that allows training to be provided online and to follow each trainee individually, especially during the exercices. A web browser is sufficient to have access to the required software (no installation of particular software on your computer is necessary). However, this type of training requires a good internet connection, please check with your IT department beforehand. We recommend to have two screens for the training course.
  • Material support: educational booklet, Powerpoint presentation, computer with software installed.
  • Trainers: all our training courses are led by experienced trainers recognized by their peers. Our trainers are the same persons who develop the software and take care of Support.
  • Teaching method: the training course consists in theoretical lectures and applications exercises. A number of concrete case studies are discussed.
  • Assessment method: a learning assessment sheet is supervised by the trainer for each participant during the session.
  • Software to be used: Simulis Thermodynamics, Simulis Properties and Simulis Conversions.
  • Training follow-up: the follow-up of the execution of the action is done with the signature of attendance sheets by each trainee and by the evaluation sheet of the training session.
  • Software: Simulis Pinch
  • At the end of the training, a certificate will be issued.
  • Rules of procedure for distance learning: [pdf document]

Prerequisites

  • Background in chemical engineering / process engineering
  • Background in energy efficiency
  • Basic knowledge in software utilization in windows environment

Information is collected before the training in order to identify the knowledge of each future participant.

Hello,

How can we help you? A question about the process simulation software and/or services… contact us.

Contact form